Makita DBM 131 Original Instructions Manual page 14

The vibration emission level set out in these instructions presents the main applications of the power
tool. If the power tool is used for other applications or with different tools or if maintenance is not
sufficient, the vibration emission level may vary. This may lead to a significantly higher vibration
emission level during the whole working period.
In order to be accurate, an estimation of the level of exposure to vibration should also take into account
the times when the tool is switched off and when it is running but not actually used. This may
significantly reduce the level of exposure to vibration during the whole working period.
Additional protective measures in order to protect the operator from vibration effects, e.g. maintenance
of power tools and tools, keeping hands warm, organisation of work processes, shall be determined.
For European Countries only
EC Declaration of Conformity
Makita declare that the following Makita Machine(s):
Designation of Machine: Diamond core drill
Model No / Type:
Are of series production and
Conforms to the following European Directives:
2011/65/EU; 2004/108/EC until 19.04.2016; 2014/30/EU from 20.04.2016; 2006/42/EC
And are manufactured in accordance to the following standards or standardised
Documents:
The Technical Documentation is kept by:
DBM 131
EN 60745-2-1:2010
EN 60745-1:2009 +A11:2010
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
26.11. 2015
Yasushi Fukaya
Direktor
Makita, Jan-Baptist Vinkstraat 2, 3070 Belgium