Makita DBM131 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Drill
  5. DBM131
  6. Operating instructions manual

Makita DBM131 Operating Instructions Manual

Wet and dry diamond core drill
Hide thumbs Also See for DBM131:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
Operating Instructions
Wet and Dry Diamond Core Drill
DBM131

Advertisement

Table of Contents
loading

Related Manuals for Makita DBM131

Summary of Contents for Makita DBM131

  • Page 1 Operating Instructions Wet and Dry Diamond Core Drill DBM131...

  • Page 2: Technical Characteristics

    ENGLISH Technical Characteristics Rated voltage: 110 V Rated power input: 1500 W Load speed: speed 0 - 800 min speed 0 - 1570 min maximum drilling capacity: speed 132 mm speed 70 mm Protection class: Collet: M 18 Weight(net): 6.8 kg Collar clamping diameter: 53 mm This machine is meant for professional use only!
  • Page 3 Main Instructions The DBM131 is in connection with diamond core drill bits meant for drill in bricks, brickwork and lime-sand- stone for dry cut and in concrete and stone for wet cut. The plastic cap stays also during the dry cut on the spindle and is only to remove for replace the shaft seals.

  • Page 4: Water Supply

    Water Supply The DBM131 is designed for wet-and dry core drilling. The water supply has to stay on the spindle always. Never drill without water supply due the spindle could be damaged. If there is water leakage between the water supply ring and the gearbox housing you have to change the water supply respectively replace the shaft seals by new and slight greasy shaft seals.
  • Page 5 Instructions for Using Diamond Core Drilling Bits Dry Drilling Only perform dry core-drilling on brickwork and soft lime or soft sand stones. Vacuum the dust away. Rock and masonry dust is harmful. We strongly recommend you to wear a face shield as well. Employ suitable type of vacuum and which also have ample of suction power.
  • Page 6 Core can be removed from the core-bit by tapping or pressing it out from behind. Never hit the core-bit itself with a hammer, as this can damage it. Remove blind core (no through bore) by the aid of cold chisel or similar, levering it loose against groove wall.
  • Page 7 Pour changer un trépan aveugle, utiliser un burin Lorsque vous percez un plafond, utilisez toujours un collecteur d’eau pour éviter que l’eau rentre dans la machine ? Eviter de protéger la machine avec des éléments qui pourraient provoquer une surchauffe. Les bagues de collecteurs d’eau sont disponibles dans toutes les dimensions.

  • Page 8: Ec Declaration Of Conformity

    We declare under our sole responsibility that this product is in compliance with the following standards or standardized documents, EN50144, HD400 in accordance with Council Directives, 89/336/EEC and 98/37/EC Yassuhiko Kanzaki Director Amministratore MAKITA INTERNATIONAL EUROPE LTD. Michigan Drive Tongwell, Milton Keynes, Bucks MK15 8JD, U.K.

Table of Contents