Advertisement
THE VOLTAGES AND CURRENTS IN THIS EQUIPMENT ARE DANGEROUS.
PERSONNEL
MUST,
INSTRUCTIONS, AND ANY LOCAL REGULATIONS.
THIS OWNER'S MANUAL IS INTENDED AS A GENERAL GUIDE FOR TRAINED
AND QUALIFIED PERSONNEL WHO ARE AWARE OF THE DANGERS THAT ARE
INHERENT IN THE HANDLING AND OPERATION OF POTENTIALLY HAZARDOUS
ELECTRICAL AND ELECTRONIC CIRCUITS. IT IS NOT THE INTENT OF THIS
MANUAL TO PROVIDE A COMPLETE SET OF SAFETY INSTRUCTIONS OR
PRECAUTIONS THAT SHOULD ALREADY BE UNDERSTOOD BY TRAINED OR
EXPERIENCED PERSONNEL IN USING THIS OR OTHER TYPES AND FORMS OF
ELECTRONIC EQUIPMENT.
THE INSTALLATION, OPERATION, AND MAINTENANCE OF THIS EQUIPMENT
INVOLVE RISKS TO PERSONNEL AND ALSO TO THE EQUIPMENT. LINEAR, INC.
SHALL NOT BE RESPONSIBLE FOR INJURY OR DAMAGE THAT IS THE RESULT
OF IMPROPER PROCEDURES OR USE BY INDIVIDUALS IMPROPERLY TRAINED
OR LACKING THE KNOWLEDGE TO PERFORM ASSOCIATED TASKS.
ALL LOCAL CODES FOR BUILDING, SAFETY, FIRE, OR RELATED STANDARDS
MUST BE OBSERVED. CONSULT LOCAL AUTHORITIES FOR THE STANDARDS
FOR THE AREA OR REGION WHERE THE EQUIPMENT WILL BE INSTALLED
AND PUT IN USE.
AT ALL TIMES DISCONNECT AC/MAIN POWER BEFORE OPENING COVERS,
DOORS, ENCLOSURES, PANELS, OR PROTECTIVE SHIELDS THAT EXPOSE
LIVE CIRCUITS. NEVER PERFORM MAINTENANCE, MAKE ADJUSTMENTS, OR
SERVICE THE EQUIPMENT WHEN ALONE OR FATIGUED.
IF ELECTROLYTIC OR OIL FILLED CAPACITORS ARE UTILIZED IN THE
EQUIPMENT AND THE COMPONENT APPEARS LEAKY, OR IS BULGING, OR IF
THE CASE OR COVERING OF THE COMPONENT APPEARS DAMAGED OR
DISTRESSED, ALLOW SUFFICIENT TIME FOR THE UNIT TO COOL OR FULLY
DISCHARGE BEFORE SERVICING. SERVICING HOT OR LEAKY CAPACITORS
CAN CAUSE A RUPTURE OF THE CASE AND POSSIBLE INJURY.
© Linear Industries, Inc. All Rights Reserved
WARNING!
AT
ALL
TIMES,
WARNING!
WARNING!
AT71-250 Transmitter Owner's Manual
OBSERVE
SAFETY
WARNINGS,
3/38
Advertisement
