Advertisement
After pressing any key on the keypad, the next screen that appears is:
(It is always possible to return to the initial LCD screen by pressing the ESC key)
After 5 minutes the initial LCD screen is shown.
4. Measurement System Table
Measurements Menu
Indications
POWER
TRANSPORT
STREAM
RF AMPLIFIERS
DRAWER
EXCITER POWER
SUPPLY
COMMUNICATION
STATUS
POWER SUPPLY
MEASUREMENTS
© Linear Industries, Inc. All Rights Reserved
Main Menu :
Setup Menu
Measurements
-> System Alarms/Log
Remote Access
Measurements Sub-
Set Indications
Forward
Reflected
Voltage ALC
Transport Stream
Data Packets Rate
Null Packets Rate
FIFO Occupation (%)
POWER
CURRENT
TEMPERATURE
+15V
+8V
Voltage
+3V
+27V
COMMUNICATION
15V
8V
Battery
AT71-250 Transmitter Owner's Manual
[0000]
Description
Measure the Direct Power
Measure the Reversa Power
Measure the ALC control voltage
Shows the INPUT transport stream protocol, or
none.
Measure the input Data Rate: 0 ~ 19,39Mbps
Measure Nulls packages: 0 ~ 19,39Mbps
0 ~ 100%
+50V Power Supply for the RF power drawer.
RF Forward Power per each drawer.
Measure the electrical current at the drawer
Ttemperature measurements
+15V voltage power supply measurement
+8V voltage power supply measurement
+3V voltage power supply measurement
+27V voltage power supply measurement
Indicate the communication status among the RF
drawer and the MASTER Control Unit.
+15V voltage power supply measurement
+ 8V voltage power supply measurement
+15V voltage battery measurement
13/38
Advertisement
