Advertisement
6.1 Output Power Setup
Starting from the Main Menu
To reach the desirable output power level, press the key (2), to increase the power or (4)
to decrease the power. Once the desirable power level is adjusted, press ENTER for software
acknowledgement, otherwise the change will not become effective.
© Linear Industries, Inc. All Rights Reserved
Main Menu :
-> Setup Menu
Measurements
System Alarms/Log
Remote Access
Select Setup Menu and press ENTER
Setup Menu :
-> Power Setup
Frequency Setup
Image Frequency Suppression
LO Leakage Suppression
Pre-Correction
Modulation Settings
Time and Date Setup
Password Setup
Transmitter Setup
Select Power Setup and press ENTER
Power Setup :
[1100]
Output: 1300 [W]
Program: 1300 [W]
AT71-250 Transmitter Owner's Manual
[0000]
[250]
23/38
Advertisement
