Table of Contents
Advertisement
TM
The RFiber+
1.
Protocol transparency; i.e. any standard can be faithfully transmitted.
2.
An optional serial port (RS232) is installed into each unit. This port allows
data communication over the same fiberoptic cable.
3.
Max. input RF power for normal operation – 0dBm.
4.
Manual Gain Control is standard in receiver to compensate for optical loss
across the fiber.
The following drawings show sample front and rear panels of the RFiber+
Fig. 2 : - RFiber+
Fig. 3 : - RFiber+
On the Front Panel of the RFiber+
on when the unit is in use. The following table describes the LEDs.
Rev1
12/03
Dekolink WIRELESS Ltd.
16 Bazel St. Qiryat-Arieh Petah-Tikva, Israel, 49510
Tel- 972-3-9180-180 Fax-972-3-
e-mail:
marketing@dekolink.com
main features are:
TM
Front Panel
TM
Rear Panel
TM
unit (Fig 2.) are three LEDs. The LEDs should be
9180
-
190
web
www.dekolink.com
TM
unit
Page 6 of 17
Advertisement
Table of Contents
