Table of Contents
Advertisement
3.2 FBDA ALARM SPECIFICATIONS
Remote Fault
Indication
(Summarized alarm)
Fault List :
Electrical Fault
Indication LED
Fiber Optic
Connection Fault
Indication LED
3.3 MECHANICAL SPECIFICATIONS:
Size
RF Connectors
Weight
Enclosure Type
Power Supply
3.4 ENVIRONMENTAL CONDITIONS:
Operating temperature
Storage temperature
Rev1
12/03
Dekolink WIRELESS Ltd.
16 Bazel St. Qiryat-Arieh Petah-Tikva, Israel, 49510
Tel- 972-3-9180-180 Fax-972-3-
e-mail:
marketing@dekolink.com
Relay Contact open for any fault. Relay closed for no
fault. Alarm is sent on the serial data link of the FO
transmitter
Power Supply Over-voltage or Under-voltage
Uplink Amplifier Over Current or Under Current
Downlink Power Amplifier Over Current or Under Current
FO Transceiver Over Current or Under Current
FO Receiver Power fall (Bad Optical Connection)
Fan Over Current or Under Current
High temperature
Illuminated LED on Monitor Box for each Electrical Fault
Illuminated LED on FO Transceiver when Optical
Connection is performing Correctly.
LED is OFF when FO Receiver Power falls.
: 400 x 400 x 300 mm approx.
: N-type Female
: 30 kg. Approx.
: Weather proof Enclosure
for Wall Mounted Installation(IP66).
: 100 to 220 VAC / 2A
: - 20
: - 30
9180
-
190
web
www.dekolink.com
°
°
C to + 50
C
°
°
C to + 70
C
Page 12 of 17
Advertisement
Table of Contents
