Call Mute; Call Timer; Conferencing - Using The Bridge - Polycom Soundstation 2W User And Administrator Manual

Call Mute

To mute a call, press the mute but-
ton. The LEDs on the top or your
®
SoundStation 2W will glow red when
your call is muted.
To release mute, press the mute button
again.

Call Timer

Call progress on an active call is moni-
tored through a local call timer. This is
visible within the active call window on
the display.
Conferencing - using the
bridge
If your telephone system supports
multi-party call conferencing, then you
can establish multi-party calls with your
®
SoundStation 2W.
►Check with your System Admin-
istrator to determine the number
of parties that can be conferenced
together.
►Your System Administrator may
need to activate multi-party
conferencing features or provide
you with instructions specific to
your telephone system.
Setting up the bridge:
1. Press the Menu button, select
BRIDGE SETUP
using the Up/Down but-
tons, and press the Select button.
ENTER PHONE NUMBER
2. Select
the bridge number using the dial
pad keys.
and enter
SoundStation 2W User Guide - 10
®
0:01:15
AMDD CALL MODE
MUTE
ADD CALL MODE
Your SoundStation® 2W
can only perform multipoint
bridged conference calls
on configured enterprise
telephone networks or when
multipoint calls are placed
through a conference bridge
or bridging service. Contact
your System Administrator
for more information.
► If you make a mistake entering
the number, use the
key to correct the error.
3. Press the SAVE soft key or
CEL if you wish to cancel the
procedure.
(555)555-1111
HOLD
(555)555-1111
HOLD
DEL soft
CAN-