Functions Of The Switches And Leds - elero PatioControl Operating Instructions Manual

4.1

Functions of the switches and LEDs

DIP switch S1
1 Actuator radio receiver power supply
2 Light module radio receiver power supply
DIP switch S2
1 Actuator locked at temperatures below
-5º
2 Snow function
3 only one actuator (M1)
4 rain alarm direction of travel
Key
S3 press and hold >3 s: delete limit positions
S4 close pergola
S5 open pergola
*) factory setting
PatioControl
ON OFF
LED
On* Off
1
On* Off
1
ON OFF
2
On Off *
2
On Off *
2
On* Off
Open Close*
[Teach-in hand-held transmitter]
Colour Type of
fl ashing
Green permanent
Green steady
Red Twice in 6 s
Red Three times in
6 s
Red Four times in 6 s
NOTE
Temperature sensor
An optional temperature sensor is required in order to
be able to use the snow, protection from freezing and
actuator lock at temperatures < -5 ºC.
Meaning
Ready to teach in
paths
Path limits are
teached-in
Rain alarm
Snow alarm
Wind alarm
19