Table of Contents
Advertisement
Handling
Module
Prerequisites
28
Handling
• The hand-held transmitter is teached-in.
• The correct channel on the hand-held transmitter
is set.
• The path limits of the actuators are teached-in.
1. Switch the power
supply to ON.
2. Open the pergola
to about 50%.
3. Switch the power supply to
the Sensero to ON.
4. Set the light potentiometer to a
value between 2 and 9.
NOTE
Set the Sensero to the privacy mode.
(see Sensero/Plus instructions:
www.elero.de/de/produkte/steuerungen/
sensero-868-ac-plus/)
6. Switch S1:
• DIP-1 = OFF
• DIP-2 = OFF
Result
• LED-1 green lights.
• Green operation LED [9] on the Sensero lights.
Deactivating the radio receiver
Advertisement
Table of Contents
