APPLIES TO:
• F1PI241EGau
TABLE OF CONTENTS:-
Enable Wireless on your Modem/Router
Setup Wireless Encryption
Wireless Security Information
64 Bit WEP
128 Bit WEP
WPA
Connecting to the Wireless Network
Before you begin you will need:
• Belkin Wireless / VoIP unit
• Power cable
• Network cable
Hardware check:
• Your computer is switched on
• The Wireless / VoIP unit is switched on
(power switch at rear)
• Network cable connected from computer to
the Wireless / VoIP unit
tsg-anz-vhd-9 -WinVista Encryption
Page 1 of 9
Self Help Guide
Enable wireless and wireless security on your Belkin VoIP modem/router.
STEPS:
1) Open your web browser (Internet Explorer, Mozilla FireFox, Safari etc)
2) In the Address Bar, delete any text and type in 10.1.1.1 or click here to
1
open the page directly
3
3
4
6
8
9
3) Type in your current password (default password = admin)
then click LOGIN
4) On the left hand side of the screen click Advanced Setup
5) You will now be presented with more options in the menu on the left. Click
Wireless then click Enable Wireless Function and click Save Settings
Wireless is now enabled. We strongly recommend that you setup Wireless
Security to help protect your wireless network against unauthorised use.
If you like to setup Wireless Security, please follow the steps on the following
page.
If you still require further assistance
contact Belkin Technical Support
Call: 1300 55 47 80
Visit: www.belkin.com/support