Reuse Of Transport Unit - Siemens 3TM Operating Instructions Manual

Transport/storage/packaging
Transport to the
installation site
Fig. 1 Transporting vacuum contactor without box
Reusing the transport unit
6
Remove accessory pack and store safely in the packaging for later installation.

Reuse of transport unit

The box and the filler materials can be reused if the vacuum contactor is to be trans-
ported again.
• Pack the vacuum contactor in reverse order.
• Close the box.
Due to the low weight, no lifting eyes are provided. The
vacuum contactor can be lifted and transported without
tools.
The fastening eyelets (*) can be used for lifting with a
crane. Watch for shifting weight!
Lift the vacuum contactor out of the box by the provided
points:
• Fastening eyelets (*)
• Base plate (2)
• Pole shell (7)
• Operating mechanism box (34)
9229 0098 176 0-
2019-01-09