Advertisement
TOSHIBA
(2) STANDARD OiPERATlON CIRCUIT
Shown below are the vacuum contactor and its auxiliary circuits (control and
monitoring).
Fig.5 represents the standard operation circuit of the normally energized type
and Fig.6 the latched type.
Wiring should be done according to these circuit diagrams.
the start button is pushed incompletely(refer to *I in Fig.6).
Fig.6 Standard operation circuit of normally energized type.
If the self-holding circuit is formed by using the auxiliary contact No
of the vacuum contactor , welding of the main contact may result when
10
Advertisement
