Download Print this page

Toshiba CV-10HA Instruction Manual page 13

High-voltage vacuum contractors, motor & transformer application, 12/15kv-320a-5/4ka

Hide thumbs Also See for CV-10HA:

TOSHIBA

1 0. Dal operation

Warning : Make sure main power is OFF.

After mounting and wiring of the vacuum contactor, make the following inspections.

1) Check for any loose connections.

2) Check for any wiring errors. Perform this test with only the control circuit energized.

confirm that the operation is correct. For the latched type contactor, check that the

latch correctly engages and trips when the close/trip signals are applied. Also,

manually trip the contactor using trip lever to verify proper operation.

Table of Contents

Cv-10hal