Fairchild T6000 Installation Instructions
Electro-pneumatic transducers standard and extended ranges
Hide thumbs
Also See for T6000:
- Installation, operation & maintenance instructions manual (36 pages) ,
- Instructions (2 pages)
Advertisement
Quick Links
FAIRCHILD T6000 Electro-Pneumatic Transducers
GENERAL INFORMATION
The Model T6000 can be mounted directly onto a flat surface using two 10-32 screws.
The Model T6000 is supplied with a Mounting Kit 16799-1 for Panel or Wall Mounting. For detailed information,
see page 2.
Figure 1. TA6000 Outline
Dimensions
Note: Unused IN and OUT
Ports are plugged (typical
Figure 2. TT6000 Outline
Dimensions
Figure 3. TD6000 Outline
Dimensions
Figure 4. TR6000 Outline
Dimensions
Standard and Extended Ranges
Installation Instructions
)
Advertisement
Related Manuals for Fairchild T6000
Summary of Contents for Fairchild T6000
- Page 1 GENERAL INFORMATION The Model T6000 can be mounted directly onto a flat surface using two 10-32 screws. The Model T6000 is supplied with a Mounting Kit 16799-1 for Panel or Wall Mounting. For detailed information, see page 2. Figure 1. TA6000 Outline...
- Page 2 Installation NOTE: The TR6000 Transducer is designed for use with The Model T6000 is supplied with a DIN Rail Mounting Kit the TR Rack Kit. Physically, it is the same as the TT6000 16893. For detailed information, see Figure 6. A...
- Page 3 Tighten connections securely. Avoid undersized fittings that will limit 2. Remove the Orifice Assembly from the unit. For the flow through the transducer and cause pressure drop down detailed information see Figure 1 “T6000 Calibration stream. Configuration on page 1.
- Page 4 Operation and Mainte nance Instructions shall not be modified or amended in any re spect without prior written consent of Fairchild Industrial Products Company. In addition, the informa tion set forth herein shall be furnished with each product sold in...