Overview Of Controls - Panasonic SC-HC200 Operating Instructions Manual

Overview of controls

Do the procedures with the remote control. You can also use the buttons on the main unit if they are the same.
A Standby/on switch [`], [1]
Press to switch the unit from on to standby mode or
vice versa. In standby mode, the unit is still consuming
a small amount of power.
Select the audio source
B
On the remote control:
Press the corresponding button to select the source.
[ ]: BLUETOOTH
[USB/CD]: USB
[RADIO]: FM AM
On the main unit:
1
1 For Australia and New Zealand
Select "BLUETOOTH" as the audio source
To start Bluetooth pairing or disconnect a Bluetooth
®
device, press and hold the corresponding button.
Basic playback control
C
View the setup menu
D
View the content information
E
Select or confirm the option
F
G Open or close the sliding door
Decrease the brightness of the display panel
H
To cancel, press the button again.
Adjust the volume level
I
Top view
CD
1
J Mute the sound
To cancel, press the button again.
"MUTE" is also cancelled when you adjust the volume
or when you switch off the system.
View the play menu
K
L Select the sound effects
USB port ( )
M
Sliding door
N
Display panel
O
Remote control sensor
P
Distance: Within approximately 7 m
Angle: Approximately 20° up and down, 30° left
and right
5