Specifications - Panasonic SC-HC200 Operating Instructions Manual

Specifications

█ General
Power supply
[For Australia and New Zealand
[For Asia
Power consumption
Power consumption in standby mode
(approximate)
With "BLUETOOTH STANDBY" set to "OFF"
With "BLUETOOTH STANDBY" set to "ON"
Dimensions (W x H x D)
Mass
Operating temperature range
Operating humidity range
35% to 80% RH (no condensation)
█ Amplifier section
RMS output power stereo mode
Front Ch (both ch driven)
10 W per channel (8 Ω), 1 kHz, 10% THD
Total RMS power
PMPO output power
█ Tuner, terminals section
Preset memory
[For Australia and New Zealand
Frequency modulation (FM)
Frequency range
87.50 MHz to 108.00 MHz (50 kHz step)
Antenna terminals
For Australia and New Zealand
Amplitude modulation (AM)
Frequency range 522 kHz to 1629 kHz (9 kHz step)
520 kHz to 1630 kHz (10 kHz step)
AC 220 V to 240 V, 50 Hz
AC 110 V to 240 V, 50/60 Hz
14 W
14
1
0.2 W
0.3 W
400 mm x 197 mm x 107 mm
1.9 kg
0°C to +40°C
20 W
200 W
FM 30 stations
AM 15 stations
75 Ω (unbalanced)
█ Disc section
Disc played (8 cm or 12 cm)
Pick up
Wavelength
█ USB section
USB port power
USB standard
Media file format support
Audio support format
Sampling frequency
Audio word size
Channel count
USB device file system
█ Bluetooth section
®
Version
Class
Supported profiles
Frequency band
Operation distance
Supported codec
█ Speaker section
Speaker unit(s)
Full range
Note:
•
Specifications are subject to change without notice.
Mass and dimensions are approximate.
•
Total harmonic distortion is measured by the digital
spectrum analyser.
No device is connected to the USB port before switching to
1
standby mode.
MPEG-1 Layer 3, MPEG-2 Layer 3
2
CD, CD-R/RW (CD-DA, MP3
790 nm (CD)
DC OUT 5 V 500 mA
W
USB 2.0 full speed
MP3 (*.mp3)
32 kHz, 44.1 kHz, 48 kHz
FAT12, FAT16, FAT32
Bluetooth Ver. 2.1 + EDR
®
Class 2
A2DP, AVRCP
2.4 GHz band FH-SS
10 m line of sight
8 cm cone type x 2
)
2
MP3
2
16 bits
2 ch
SBC
13