Table of Contents
Advertisement
Introduction
The instructions in this guide assume a general knowledge of computer installation procedures, familiarity
with cabling requirements, and some understanding of USB devices.
note
NOTE emphasizes additional information that could be useful.
CAUTION symbol indicates important information about an operational requirement.
Product Contents
Packaged with:
•
Local Extender
•
Remote Extender
•
Quick Start Guide and Warranty Information
Requirements
note
To complete the installation, you will also require the following items that are not included with the
product:
•
USB 1.1 or 2.0 compatible computer (host computer) with a USB compliant Operating System
•
USB 1.1 or 2.0 compatible device(s)
•
Cat 5 Unshielded Twisted Pair (UTP) cable with two RJ45 connectors (if using surface cabling), OR,
Cat 5 cabling with two information outlets and two Cat 5 patch cords with RJ45 connectors (if using
premise cabling)
All references to Cat 5 cable in this document refer to solid core and represent the minimum
requirement.
About the USB Rover® 1850 Cat 5 USB 1.1 Extender
note
The USB Rover® 1850 enables users to extend USB devices up to 131 feet or 40 meters. Extension
distances up to 85 meters may be achievable with low-speed HID devices such as keyboards and
mice.
4
Advertisement
Table of Contents
