Powering The Camera - Rexing V1P 3rd Gen User Manual

V1P 3rd Gen Manual

Powering the Camera

You must always connect the camera to a power source while operating
the camera. Connect the camera to your vehicle via the included car charger
cable. Connect the larger end of the car charger cable to your car's cigarette
lighter (12V DC power outlet). Connect the other, mini-USB end to the mini-USB
port on the device.
Connecting the charger improperly may cause serious damage to the
device. Any damage caused by misuse is not covered by the warranty.
Use only Rexing-approved chargers. Using unapproved chargers or
cables can damage the device.
If the device receives an unstable power supply, the screen may not
function properly. If the device is not operating properly using a Rexing-
approved charger, please contact Customer Care (care@rexingusa.com).
23
©2018 REXING All Rights Reserved