Getting Started; Installation - Rexing V1P 3rd Gen User Manual

V1P 3rd Gen Manual

Getting Started

Installation

Video guide can be found at video.rexingusa.com.
1. Attach the front camera to the window mount
Make sure that you mount the front camera in a safe, appropriate location
where it won't obstruct the driver's view. Clean your windshield before applying
the mount. Wait at least 20 minutes after applying the mount to the windshield
before attaching the camera.
2. Insert a memory card
You will need to insert a memory card before you can begin recording. Do not
insert or remove a memory card while the device is powered on. The V1P
3rd Generation supports Micro SD cards up to 256GB in size.
21
©2018 REXING All Rights Reserved