Adjusting The Brakes; V-Type Front Brake - neomouv FACELIA User Manual

2.3

Adjusting the brakes:

 5 mm Allen Key
 Screwdriver

2.3.1 V-type front brake:

The front brake is operated by the left handle on the handlebar.
Tighten the nut on the brake handle fully. This adjustment will enable you to compensate later for the natural
slackening of the brake cable.
Loosen the cable clamp and pull the cable until the pads touch the wheel rim. Tighten the cable clamp (pay
particular attention to either end of the tubing which must fit easily into the rigid connectors on the brake
handle and V-Brake).
The pads are in the right position when they are an equal distance from the wheel rim. The final adjustment is
made by tightening the screws on the brake shoes with a screw driver (a distance of about 0.1 to 0.5 mm
from the wheel rim).
CARLINA (+ HY) – FACELIA – LINARIA – ARTEMIS Manual
6