1
2
3
In addition, there is a RESTORE button available on the front panel.
Insert a paper clip if a restore is required.
• A brief, momentary press: To delete a downloaded configuration and reboot.
• Press and hold for more than 10 sec: To force the unit into a full factory restore.
Power
Restore
Switch Ports
Solid orange
Flashing green
Solid green
Off
N/A
Off
Solid orange
Solid green
Switch is unable to
connect to the Meraki
cloud
Firmware upgrade in
process
Switch is fully
operational and
connected to the
Meraki cloud
Switch does not have
power
Restore button to clear
switch IP and local
configuration settings
No client connected
Link operating at 10/
100 Mbps
Link operating at 1000
Mbps
3