Print Head; Carriage Unit - Star AR-1000 Technical Manual

5.

Print Head

[4]
[5]
[3]
6.

Carriage Unit

[8]
[1]
[9]
[10]
[12]
[11]
[5]
[3]
[4]
[16]
[7]
[17]
[13]
[2]
[1]
[2]
[15]
[6]
[14]
(1) Remove
Upper case unit as described in section 1.
• Ribbon cassette [1]
• Move the carriage unit [2]to left side.
• Two screws [3]
• Two cables [4]
• Print head [5]
WARNING
• The Print head gets hot after printing .
Do not touch it untill in cools.
(2) Adjust
• Gap between print head and platen. Refer to se-
ction 1 of chapter 2.
(1) Remove
Print head as described in section 5.
• Two screws [1]
• Rear angle [2]
• Spring [3]
• Screw [4]
• Tension lever unit [5]
• Two screws [6]
• Ribbon gear holder unit [7]
• Two flanged nuts [8]
• Gap adjust gear [9]
[12]
[10] • Two bushings [10]
[8]
• Two screws [11]
[11] • Two adjuster bushings [12]
• Carriage stay [13]
• Release lever [14]
• Cable holder [15]
• Head cable [16]
• Carriage unit [17]
– 18 –