Camtree MB-20 Instruction Manual page 3

MB-20 Swing Away wide angle Mattebox

Attach knicker on conversion ring, then attach the ring with conversion ring holder and
tighten the knot.

You can easily insert the filter holders
as shown in the image.
Note: The filter holder supports the use of 4x4" square filters, kit includes 2pcs of filter holders;
one is rotating 180° and another is non-rotating.
Note: Pulling the knob upwards releases
the MB-20 CF Matte Box allowing it to
easily swing away from the camera.
YOUR MB-20 SWING AWAY WIDE ANGLE MATTE BOX IS READY TO USE
SHOWN WITH OPTIONAL ACCESSORIES.
3