Setting The Date; Setting The Alarm - BIOS WEATHER WEATHER CUBE Instruction Manual

4.0 Setting the Date

1. When the DATE is displayed on the Weather Cube, press and hold the SET button.
NOTE: If the Weather Cube is not displaying the DATE, press the SET button to go
through the different screens until DATE appears.
2. The year will flash, press the UP or DOWN button to select the year. Once selected, press
the SET button to confirm.
3. Next the month will flash, press the UP or DOWN button to select the month. Once
selected, press the SET button to confirm. Once confirmed, the Weather Cube will go back
to normal mode.

5.0 Setting the Alarm

There are 3 alarms that can be set on the Weather Cube.
1. Press the SET button until you see "
" will flash, press the UP or DOWN button to turn the alarm ON, the Weather
2. "
Cube will display "
3. The hour digits will flash, press the UP or DOWN button to select the hour digits. Once
selected, press the SET button. Follow the same steps to set the minute digits.
4. Follow the same steps as above to set Alarm 2 and Alarm 3.
", then press and hold the SET button.
". Press the SET button to confirm.
Alarm On
Alarm Off