12 Volt Battery Reset Switch - Hyundai IONIQ HYBRID 2019 Quick Reference Manual

FEATURES AND CONTROLS

12 VOLT BATTERY RESET SWITCH

07 I Quick Reference Guide
If the door is locked you will need to
use the manual key to enter the
vehicle after removing the lock
access cover.
a) Use the manual key from the
FOB to push up the under the
driver's side handle as shown.
Make sure the tab stays up. If it
does not you will need to keep it
pressed up while performing the
next step.
b) While holding the handle out,
pull off the access cover to
expose the manual lock cylinder.
c) Open the door with the manual
key.
This vehicle does not have a
replaceable 12V flooded lead acid
battery. The 12V battery is
integrated into the lithium high
voltage battery assembly. Is it
automatically protected against
vehicle current draw when a
minimum level of 12.8V 10% SOC
level is reached. The 12V Battery
Reset Switch has to be activated in
order to start the vehicle. This
should negate the need to jump
start the car.
HYUNDAI
If the vehicle Start/Stop button does not respond (it has no indicator
light) and the dash does not illuminate, the vehicle may be operated
after the 12V Battery Reset Switch is activated per the instructions
below.
1. Press the 12V Battery Reset switch to reconnect the 12V battery.
2. Start the vehicle within 15 seconds of pressing the 12V Battery
Reset switch.
3. After starting vehicle ( indicator on), operate the vehicle safely
outdoors stopped and/or drive it for 30 minutes total to charge
the 12V battery fully.
If the reset does not work due to over discharge of the 12V battery,
try to jump-start the vehicle. For more detailed information, please
refer to your Owner's Manual.
IONIQ HYBRID
Quick Reference Guide I 08