Volt Battery Reset Switch - Hyundai IONIQ Hybrid 2017 Quick Reference Manual

FEATURES AND CONTROLS
STEERING WHEEL ADJUSTMENTS
NOTE:
1. Pull the lever
2. Set the angle
3. Pull the lever
1
FUEL FILLER DOOR
1. Push the fuel filler door opener
2. Remove the fuel tank cap.
NOTE:
Tighten the fuel filler cap until one
click is heard.
06 I Quick Reference Guide
2
3
Do not adjust while driving.
1
down.
2 3
and distance .
1
up to lock position.
button.
HYUNDAI

12 VOLT BATTERY RESET SWITCH

This vehicle does not have a
replaceable 12V flooded lead acid
battery. The 12V battery is integrated
into the lithium high voltage battery
assembly. Is it automatically protected
against vehicle current draw when a
minimum level of 12.8V 10% SOC level
is reached. The 12V Battery Reset
Switch has to be activated in order to
start the vehicle. This should negate
the need to jump start the car.
If the vehicle Start/Stop button does not respond (it has no indicator light)
and the dash does not illuminate, the vehicle may be operated after the
12V Battery Reset Switch is activated per the instructions below.
1. Press the 12V Battery Reset switch to reconnect the 12V battery.
2. Start the vehicle within 15 seconds of pressing the 12V Battery
Reset switch.
3. After starting vehicle ( indicator on), operate the vehicle safely
outdoors stopped and/or drive it for 30 minutes total to charge the
12V battery fully.
If the reset does not work due to over discharge of the 12V battery, try
to jump-start the vehicle. For more detailed information, please refer to
your Owner's Manual.
IONIQ HYBRID
Quick Reference Guide I 07