Related Manuals for Alula BAT WIFI
Summary of Contents for Alula BAT WIFI
- Page 1 PRODUCT MANUAL BAT WIFI SKU: IPD-BAT--WIFI Wi-Fi & Internet Alarm Communicator alula.net...
- Page 2 Product Manual BAT WIFI...
-
Page 3: Quick Reference
QUICK REFERENCE Programming for TELCO use on GE NetworX: Section Device 0 Universal WiFi BAT as Sole Communicator Location 0 Enter the Phone Number Location 1 Enter Account Number Location 2 Enter ‘13’ for Contact ID Programming for TELCO use on Vista: Section Universal WiFi BAT as Sole Communicator Enter Phone Number... -
Page 4: Table Of Contents
Technical Support Information For Technical Support, call toll free: (888) 88-ALULA alula.net www.alarmdealer.com setup.alarmdealer.com - Mobile Friendly Alula 1402 Heggen St. Hudson, WI 54016 Table of Contents Quick Reference ..........................2 Getting Started ..........................3 • Pre-Installation....................... 3 • Installation Guide ......................3 DSC Panel Wiring and Programming .................. -
Page 5: Pre-Installation
• Programming is simple using the alarm control panel. Written instructions are included in the “Wiring & Programming” section of this manual. AP Configuration Tool QuickStart Guide An easy to use QuickStart Guide has been designed to make the BAT WiFi easily join the customer’s WiFi Network. Connecting to a Wireless Network (AP Configuration) The BAT-WIFI has an AP Configuration Tool which is designed to assist with ensuring the BAT-WIFI joins a wireless network easily. - Page 6 2 Taps - The BAT WIFI will update the signal strength [Device must be paired to a WiFi] 3 Taps - The BAT WIFI device will factory reset and lose connection to any WiFi it was previously attached to.
- Page 7 NOT matter and is NOT used in the signal delivery process. When using Alula mobile and web interfaces, customers can enter their 4 digit code to arm & disarm the system. For panels that are “Interactive Ready” the following programming will give you full Virtual Keypad access: DSC Panels: No programming required to make the virtual keypad operate.
- Page 8 After the unit is properly connected to the Alarm Panel and powered up, use the following steps to validate that the system is functioning properly: • Ensure that virtual keypad functionality works through www.alarmdealer.com, www.setup.alarmdealer.com, or the Alula mobile app. • Ensure that alarm signals reach your central station. Wiring & Programming for Popular Panels The following pages are organized by Alarm Panel type.
-
Page 9: Dsc Panel Wiring And Programming
DSC Panel Wiring and Programming DSC Keybus & Tip/Ring Wiring... -
Page 10: Dsc Pc-Link Connection
DSC PC-Link connection This allows for remote downloader functionality with Alula’s Universal Downloader (uDownloader) software. DSC PC-Link Wiring... - Page 11 Account Number in the Panel. As long as your Reporting Codes are in the Panel and are transmitting in Contact ID it will send signals. Programming when using TELCO (Recommended): General Concept Programming on DSC (BAT WIFI as Sole Communicator):...
- Page 12 Programming ONLY when using PC-Link to send Signals (Not Recommended): if GSM is used, it must be in dialer capture mode BAT as Fail BAT as Dual BAT as Sole over w/Add'l Reporting w/Add'l Section Code Summarization Communicator Communication Communication Device Device Options to turn on/off alarm/...
- Page 13 Vista Panel Wiring and Programming Vista Keybus & Tip/Ring Wiring...
- Page 14 All Control Panels must have a Phone Number in the Panel and an Account Number in the Panel. As long as your Reporting Codes are in the Panel and are transmitting in Contact ID it will send signals. Programming when using TELCO (Recommended): Programming on Vista (BAT WIFI as Sole Communicator): For BAT as Sole...
-
Page 15: Ge Panel Wiring And Programming
GE Panel Wiring and Programming GE Keybus & Tip/Ring Wiring GE Panel Programming Recommended: General Concept Programming on GE NetworX: Section BAT as Sole Communicator Code Summarization Device 0, Enter the Phone Number Location 0 Device 0, Enter Account Number Location 1 Device 0, Enter ‘13’... -
Page 16: Generic Alarm Panel Wiring And Programming
Generic Alarm Panel Wiring and Programming Generic Keybus & Tip/Ring Wiring Generic Alarm Panel Programming • Program the panel Phone Number into the panel • Program the Customers Account Number into the panel • Program Reporting codes into the panel •... - Page 17 • A programmable output on the alarm panel will be used to signal to the BAT (Y/Tx terminal) that the panel has entered Arm/Disarmed State. • The Z1 output on the BAT WIFI will be used as a keyswitch connecting to a ‘zone’ terminal on the alarm panel.
- Page 18 Generic Keyswitch Programming Examples for Ademco, Digital Security Controls, and GE NetworX for keyswitch and panel state program output operations, as well as Keyswitch state programming are given below. Most alarm panel manufacturers will have the capability to configure a zone as a keyswitch and generally have at least one on-board programmable output that can be configured to activate on a number of different control state conditions.
-
Page 19: Supported Panels Charts
Supported Panels Honeywell Panel Revision Digital Dialer Full Interactive GSM Emulator Vista-10P 2.6+ ✓ ✓ ✓ Vista-10PSIA 4.0+ ✓ ✓ ✓ ✓ ✓ ✓ Vista-128BP 3.0+ Vista-128BPE 1.0+ ✓ ✓ ✓ ✓ ✓ ✓ Vista-128FB 1.0+ Vista-128FBP 2.0+ ✓ ✓ ✓... - Page 20 GE NetworX Panel Revision Digital Dialer Full Interactive GSM Emulator NX-4V2 ✓ ✓ ✓ ✓ ✓ ✓ NX-6V2 NX-8V2 ✓ ✓ ✓ Note: Any Panel not on the supported lists above should function properly as long as it transmits Contact ID through Tip &...
-
Page 21: Specifications
Specifications Frequency: • WiFi 802.11bg(mixed mode) Power: • Externally provided 12v DC • Typical Current 130 mA • Max Current 185mA Environmental: • Temperature Range - 30° to +70° C (- 22° to +158° F) • Humidity 0 to 95% non-condensing Physical: •... - Page 23 Alula 1402 Heggen St. Hudson, WI 54016 (888) 88-ALULA alula.net * All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Need help?
Do you have a question about the BAT WIFI and is the answer not in the manual?
Questions and answers