Alula RE116-U Manual

USE THIS MANUAL IF USING THE SPECIAL TRANSMITTER TO SEND
RE116-U Wireless Siren

Features

• Remote Wireless Siren
• Works with any panel with siren terminals
• Special transmitter at panel sends siren signals
• Siren cadence synchronized to panel
• Automatically follows panel beep volume
• Wall-powered, with backup power on CR123A battery
• Can use multiple Sirens on one panel
• Cover tamper
• Unparalleled wireless range
• Low Battery indication
• 3x4x1.25 inches

How it works:

Key Instructions

TYPICAL HARDWIRE CONNECTIONS

Refer to Siren Hardware Connections for specific panel connections and settings.
Connect Special Transmitter to Control Panel Siren:
Remove Special Transmitter battery during install.
•
MOUNT SPECIAL TRANSMITTER OUTSIDE
•
ANY METAL CANS!
RE116-U_47-0051-02_RevA
Tech Support Line: (888)88-ALULA (888) 882-5852
SIGNAL TO SIREN
Special
Transmitter
2. Transmitter tells
wireless siren to make
noise, following siren
terminals pattern
1. Panel siren output
terminals signal alarm or
status beeps
Page 1 of 4
alula.net
4. Wireless siren sends
supervisories, low battery and
tamper statuses
(GE systems only)
3. Wireless siren
makes same noise
pattern as panel
SIREN +
4.7K
SIREN -
30-Apr-18
More than one
siren can be
used