Alarm With Custom Snooze Time - La Crosse Technology C8929 Instruction Manual

ALTERNATE SELECTION: You may choose to alternate the Time Projection with another item. Time and
selected item will alternate every 5 seconds.
1. Hold PROJ INFO button 2 seconds to choose alternate projection mode. ALT WITH TIME OFF will show.
2. Press and release the + or – buttons to select ALT WITH TIME ON.
3. Press and release the PROJ INFO button to toggle through selections.
4. Press the SNOOZE LIGHT button to exit.
OUT
A LAR M W IT H C U STO M SN OOZE TIME
Set Alarm Time:
1. Hold the ALARM button for 3 seconds to enter alarm time set mode. The alarm hour will flash. Press the +
or - buttons to set alarm hour
2. Press the ALARM button to confirm and move to the minutes. The alarm minutes will flash. Press the + or
- buttons to set the minutes.
3. Press the ALARM button to confirm and move to snooze duration. The snooze time will flash and start at
the preset of 10 minutes. The date area will read "SNOOZE"
4. Press + or - buttons to set Snooze Duration. Increase or decrease in 5 min intervals up to 120 min.
5. Press and release the ALARM button to confirm and exit.
Note: Alarm is crescendo sound. When the alarm sounds, it continues for 2 minutes and then shuts off
completely.
Alarm Hour
Wi-Fi Projection Alarm Clock
EXTRA
SENSOR
Alarm Minutes Snooze Duration
Page | 15