Nap Timer; Moon Phase - La Crosse Technology C8929 Instruction Manual

N AP TIM E R
Sometimes it is easier to use the Nap Timer to avoid reprogramming your time alarm. Set it one time then
just press the NAP button to start the timer.
Set Nap Timer:
1. Press and hold the NAP button for 3 seconds to enter nap set mode.
2. The time will flash and start at the preset of 30 minutes. The date area will read "NAP TIME"
3. Press + or - buttons to set nap duration. Increase or decrease in 5 min intervals up to 120 min.
4. Press the NAP button to confirm and start nap.
• While a nap is in progress the date area will display "NAP TIME" and time will count down to zero when
the alarm will sound.
• The nap duration will be saved in the station. Next time the NAP button is pressed it will display the
amount of time used last and the nap will start.
• When alarm sounds, NAP TIME "0m 00" will flash. Alarm beeps for 2 minutes then returns to normal
display or press any button to stop ringing and return to normal display.
MO O N PHASE
The Moon Phase will only show when if your alarm clock is not connected to the La Crosse View app.
When your alarm clock is connected, the Moon Phase will be replaced by 12 hour Forecast Icons.
New Moon
Full Moon
Wi-Fi Projection Alarm Clock
Nap Duration
Small Waxing Large Waxing
Crescent Crescent
Large Waning Small Waning
Gibbous
OUT
IN
First Quarter
Last Quarter
Gibbous
Nap countdown
TODAY FORECAST
12 HR
HI
LO
Small Waxing Large Waxing
Gibbous Gibbous
Large Waning Small Waning
Crescent Crescent
PRECIP
Page | 17