Routine Maintenance; General Maintenance Points - Vision Lynx Stereo Manual

ROUTINE MAINTENANCE

ROUTINE MAINTENANCE
Clean the viewing screen periodically with optical cloth.
If, after cleaning the
viewing screen, the
picture quality is
below standard,
remove and clean the
graticule if fitted.
If the graticule
requires adjustment
after it has been
cleaned, see page 9.
Viewing
Screen
Changing the
Sub-Stage Fuse:
Remove the 4 rubber
feet from the base
(push fit).
Remove the 5 base
securing screws.
Replace the fuse with
an 800mA quick
blow type.
NOTE
When the base is
replaced, ensure
the heat slots line
up with the heatsink
and substage bulb.
Page 10
Graticule
Securing Clip
Base
Securing
Screws
Sub-Stage
Fuse
GENERAL
MAINTENANCE
POINTS
Retaining Knobs
Input
Voltage
Power
Selector
Fuse
Rubber
Feet
NOTE
Ensure the Voltage Selector is
turned to the correct setting.
For Japan and some Far
Eastern markets the voltage
selector is marked 100 - 110V.