Attaching Head; Objective Lens; Attaching 6 Point Ringlight - Vision Lynx Stereo Manual

ASSEMBLY
Alignment Pin
Securing Screw

OBJECTIVE LENS

ATTACHING
6 POINT RINGLIGHT
Objective
Lens
Securing
Screws
Beam
Converger
(only for 1.5x or 2x lens)
Page 6

ATTACHING HEAD

Head
Connector
Head
Socket
Lens
Securing Screw
Place the ringlight into position and tighten the
securing screws. Clip the Beam Converger (only
required if using a 1.5x or 2x objective lens) into
place and attach the fibre optic cable to the
illuminator.
6 Point
Ring Light
Insert the Head
Connector in the Head
Socket. Place the Head
on to the Zoom/Focus
Assembly, ensuring the
alignment pin in the
Zoom/Focus Assembly
lines up with the relevant
slot in the Head. Tighten
the securing screw.
Objective
Lens