Zoom Multiplier; Mains Connection; Inserting Graticule - Vision Lynx Stereo Manual

ASSEMBLY
Remove the Head. Place the Zoom
Multiplier Assembly into position and
tighten the securing screw.
Replace the Head on to the assembly
and tighten the Head Securing
MAINS
CONNECTION
Anti-glare
Shield
Squeeze the securing
clip at the base of the
front cover and lift the
cover off. Loosen the
appropriate retaining
knob (the graticule
can be placed on
either side of the
head), slide the
graticule into position
and re-tighten the
knob. Replace the
front cover.
Page 8
Zoom
Multiplier
Head
Securing Screw
Securing Screw
Connect Mains
at Rear
Fuse
Graticule
Securing Clip

ZOOM MULTIPLIER

Attach the anti-glare shield as
shown left.
Ensure the Voltage Selector is
Mains
On/Off turned to the correct setting.
Switch
For Japan and some Far
Eastern markets the voltage
Mains
selector is marked 100 - 110V.
Input
Voltage
Selector
Retaining Knobs
Head
Connector
Head
Socket
NOTE
INSERTING
GRATICULE