Assembling Of The 1000 R.p.m. Kit - Del Morino Levante Use And Maintenance Manual

6. ASSEMBLING OF THE 1000 R.P.M. KIT

In order to assemble the transformation kit from 540 rpm to 1000 rpm it is necessary to disassemble the
transmission and replace some components.
a) To disassemble the transmission follow the instructions below :
1 Take off the cover "M"
2 Take off the protection "A" .
3 Loosen completely the screw "B" of the tensioner removing the nut and the washer
4 Unscrew completely the 2 nuts "C" and take off the 2 spacersi "D"
5 Loosen the 2 "E"
6 Remove the pulleys "F" and "G" and the 4 belts "H"
7 Remove the belt tensioner "I"including the roll "L"
8 Remove the seeger "N" and slip off the roll "L" from its axle.
b) Replacemnet of the components:
1 Replace the old cover "M" with the new one "P" provided with the kit
2 Replace the old body "I" of the tensioner with the new one "Q" provided with the kit.
c) To re-assemble the transmission, follow the instructions below:
1 Follow backwards the points from 8 to 1 of the paragraph (a).
16