Attach Hoses To Pressure Washer; Plug Gfci Into Power Receptacle - Ford FPWE-F2.1 Operator's Manual

Step 4 - Attach Hoses to Pressure Washer
• Remove the shipping plug from the outlet on the machine.
• Connect the garden hose to a water supply and turn the water on for a few seconds to flush out any debris that may
have collected in the hose.
• Connect the high pressure hose to the machine's outlet.
• With the water supply turned off, connect the garden hose to the hose inlet on the front of the machine.
• Turn water supply back on.
Never connect the pressure washer to a hot water supply. Hot water will destroy the pump
WARNING!
and overheat the motor and void the warranty.
Step 5 - Plug GFCI into Power Receptacle.
Plug in the GFCI into a power receptacle. Firmly press and release the test button, then press and release the reset button.
The light on the GFCI should be illuminated.
ASSEMBLY
Garden Hose Connection
11
High Pressure
Hose Connection