Table of Contents
Advertisement
Installation of Oval Base
1. For ease of operation, lay the speaker on a table (place a cloth on the table
to protect the fabric grille).
2. Remove the set screws from the bottom of the speaker with 1/8 inch Allen
wrench (provided).
3. Note-- The stand-offs have a very tight fit with the speaker panel. Insert the
3 1/2 inch bolts in the stand-offs and (using only your fingers) thread the
screw into the speaker. Using a #2 Phillips screwdriver, pull the stand-off
onto the speaker panel using the bolts. Remove the bolts and install the
oval base.
Installation of L-feet
Install the L-feet on the back of the speaker and tighten the screws.
Revised 2-10-19
Page
5
of
10
Hide quick links:
Advertisement
Table of Contents
