Team Corally SSX10 Instruction Manual page 17

0 5 10 15 20
14
SHOCK ABSORBER FILLING
FILL MOVE
• Pull the Shock shaft • Move the piston up&down
down. (3-4x) to release the air
• Fill the shock body with bubbles in the silicone
silicone oil. oil.
WAIT
UP
5min
3-4x
• Pull the Shock shaft
down.
• Install the shock absorb-
er vertically and let it sit
for a few minutes until
the bubbles rise to the
surface.
TIGHTEN MOVE
50%
UP
• Install the silicone mem- • Gently move the piston
brane in the shock cap. in upper position.
• Tighten slightly the • The excess will flow out
shock cap on the shock of the shock absorber.
body.
• A little oil will flow out of
the shock absorber.
TIGHTEN
FULLY
• Allow the piston in the
upper position.
• Tighten the cap fully but
not too much otherwise
the membrane will be
deformed.
17