Safety Information - Skully FENIX AR User Manual

Safety Information

Ride safely. The SKULLY FENIX AR is designed to provide maximum safety and com-
fort. However, motorcycle riding presents specific challenges and risks. The FENIX
AR can help reduce but not eliminate risk of injury. Please observe all applicable traf-
fic laws and use caution when riding a motorcycle.
Riding a motorcycle or off-road vehicle implies the user accepts the risk that some
reasonably foreseeable impacts will exceed the helmet's capacity to protect against
injury.
Use the FENIX AR only as instructed by this manual. Failure to do so may result in
unsafe riding conditions and will void the warranty. Make no modifications to the
helmet.
Before riding, make sure your helmet fits properly and that you are comfortable with
the size and the weight of the helmet. The helmet chinstrap must be securely fas-
tened at all times when riding with the FENIX AR. Failure to fit and fasten the helmet
properly may cause the helmet to come off the wearer in an accident and result in
severe injury or death.
For proper fit and safety, the helmet must always be worn with the lining attached.
The FENIX AR is designed to provide maximum protection for the rider. However,
the helmet should be handled carefully to avoid reducing the protection it provides.
Dropping the helmet on the ground can degrade performance and should be avoid-
ed. If the helmet is dropped from a moving vehicle, it could sustain serious damage
that is not visible.
After your helmet has experienced a substantial impact, its safety features may be
compromised. The damage may not be visible, but the ability of the helmet to protect
wearer is reduced. Shock-absorbing materials within the helmet will have become
compacted, reducing the ability to absorb further shocks. Check the warranty for
repair or replacement details.
If you think your helmet's safety performance is compromised for any reason, DO
NOT USE the helmet for riding. A helmet that has been involved in a serious impact
should be destroyed and replaced. If you are uncertain, stop using the helmet and
contact SKULLY for an evaluation.
Do not attempt to modify the helmet in any way. Do not remove or add any parts or
change any physical aspect of the helmet. Doing so may reduce the ability of the
helmet to protect the wearer and will void the warranty.
Do not use the top vent, spoiler and chin skirt as a handle. These pieces are de-
signed for specific functions and are not intended to support the weight of the hel-
met.
PN: 013-000006 01
3