Skully FENIX AR User Manual page 10

Turning on Your Helmet
The power button is located on the left
side of the chin bar inside the helmet
(see illustration).
Take your left thumb and find the rasied
button on the inside of the helmet, in
front of your chin and slightly to the
left. Press the button once briefly (you
should feel it click)
Grab the 2 straps on the bottom of the
helmet, pull apart, and put it on your
head.
Wait 2-3 Seconds, you should see the
HUD flash white, and show the SKULLY
logo
Both the Bluetooth ID (SK-xxxxxxxxx)
and software version will appear on the
HUD. Once the Bluetooth ID appears the
helmet is ready to pair.
Pair your helmet with your smartphone, within 2 minutes of powering helmet.
To turn off the FENIX AR, press and hold the power button down for 5+ seconds.
Power Button Functions
POWER ON (IF HELMET IS OFF)
After helmet is on:
One Click: Play music; Pause music when music is playing;
•
swers incoming phone call
Two Clicks: Plays next song; rejects incoming phone call
•
Three Clicks: End navigation Screen and displays
•
Bluetooth® firmware version
Four Clicks: No action
•
Five Clicks: re-initiates Bluetooth® pairing mode for 2 minutes
•
Long press of 5+ seconds: turn helmet off
•
10
POWER BUTTON
an-
SKULLY Technologies