Denso QS20P-A User Manual page 35

2d code scanner ac adapter driven

Table of Contents

(4)

Code ID marks

Code ID marks are characters that identify the types of QR codes. You may select

whether those ID marks will be transferred, by using the QR-coded parameter

menu.

QR code

Split QR code

("Structured Append")

Data Matrix

(5)

No. of digits

The number of digits in code data is expressed in 4 bytes. You may select

whether it will be transferred, by using the QR-coded parameter menu.

n1: 4th digit (0 to 9)

n2: 3rd digit (0 to 9)

n3: 2nd digit (0 to 9)

n4: 1st digit (0 to 9)

(6)

Data read

The QS20P-A will transfer read data whose contents will differ depending upon

the code type as described below.

• QR Code

All data read

NOTE: If the QS20P-A reads split QR codes in Non-edit mode, it will transfer

not only the read data but the ordinal ID number (a single byte in hex.)

assigned to the split code, the number of splits (a single byte in hex.), and

parity (double bytes in hex.).

• Data Matrix

All data read

Code type

In edit mode

In non-edit mode

Code ID mark

Table of Contents