Download Print this page

Midea AC100-U Owner's Manual page 6

Advertisement

OPERATING INSTRUCTIONS
1、ON/OFF: Plug the unit into an electric outlet, the until will be ready to run. Press the ON/OFF
button to start running.
2、 OSC.: Press the OSC. button once to turn on the oscillation and the wind will oscillate in
horizontally 120 degrees, press it again to stop.
3、 SPEED: When the air cooler is turned on, the fan will run at medium speed for 3 seconds
before running at low speed (default speed). Press the SPEED button each time, the fan speed
will recycle as shown below:
4、
STYLE / NATURAL: Press the NATURAL button once to turn on this feature. Controlled by
the special program in the microcomputer chip, the fan will be switched among high speed,
medium speed, low speed and stop automatically according to the default settings. it is
simulated like natural breeze.
TIMER: When the air cooler is running, press the TIMER button to preset the running time,
5、
and the presetting time will recycle each time pressing this button as shown below:
6、
ION: Press this button, the function of Anion is turned on. Press the button again, this function
is turned off.
7、
EVA./COOLER: Press the EVA./COOLER button once, the unit will act as a evaporator now.
If combined with Ice box, this unit can lower its surrounding about 3°C.
Remote Controller
1. Open the remote controller rear cover and set a CR2032
battery; then the remoter control can be used. It has the
same button with the control board.
2. The effective distance for the remote controller is 6 meter.
Ice Box
The ice box can absorb the heat in the water, which can lower the temperature of the water tank.
It can make the air cooler flow cooler air.
Use method:
1. Take out the ice box and put it into the refrigerator, till the ice box is totally frozen.
2. Put the frozen ice box into the water tank.
cancel
5
SPEED
ON/OFF
ION
EVAPORATOR
OSC.
TIMER
STYLE

Advertisement

loading