Advertisement
INSTALLATION AND USE
1. Unfold the package and take out the air cooler, put it on the ground.
2. Check out the spare part.
3. Install the universal wheels: Take out the universal wheel and install them on the air cooler.
(Fig.1)
Wheels
4. Watering: Pull out the water tank from the body about 1/3, and pour water into the
water tank. If you want to remove the water tank only do so when the power has been
switched off for a minimum of 2 minutes.
Attention:
Pay attention to the water line when watering.
When watering, the water must not be higher than the"MAX"water line. When
humidifying, the water must not be lower thanthe "MIN" water line.
If need to increase the cooling effect, can put the frozen ice box into the water tank.
(Fig.2)
5. Check the power cord to find whether it is same with the rating label.
Attention: Do not connect the power cord with a wet hand.
When remove the machine, please pull out the power cord.
When connect the power cord, please make it contact well.
KEY CONTROL
Control panel
EVA. /
COOLER
Fig.1
ION
NATURAL
TIMER
4
Fig.2
Add water and
Frozen ice box
Water tank
ON/OFF
SPEED
OSC.
Advertisement
