Advertisement
Quick Links
Advertisement
Related Manuals for HPF B400
Summary of Contents for HPF B400
- Page 1 WEIGHT BENCH MODEL: B400...
- Page 11 Step 4 Attach the leg lift (01) into the front upright post. Secure by using a half threaded hex head bolt (44), two washers (37), and tighten with a nylon nut (49). Insert two foam roller tubes (II) into the top and bottom of the leg lift (01). Insert four foam rollers (27) onto each end of the foam roller tubes (II).
- Page 17 Height adjustment of the arm curl rest The arm curl rest may be adjusted in five different heights (approx. 91 95.5 104.5 109 cm). It is secured by the safety screw as shown. In order to change the height of the arm curl rest, please remove the safety screw, move the arm curl rest upward or downward until you reach the desired height, align the holes and fix the safety screw...
- Page 22 VII. Maintenance and care After the training, you should wipe the device and handles with a dry cloth. Thus, you avoid that the components are contaminated by dried sweat. The use of your bench leads to natural wear and tear. This requires regular care and maintenance. Under normal conditions and use your weight bench is maintenance free.
- Page 23 Some experts believe the incorrect or prolonged use of almost any product could cause serious injury or death. For information that may reduce your risk of serious injury or death consult thepoints below and additionall y , the information available at www.datastreamserver.com/safety - Consult all documentation, packaging and - The product has been supplied by a general merchandise...
Need help?
Do you have a question about the B400 and is the answer not in the manual?
Questions and answers