Jonsered CS 2245 II Operator's Manual page 3

3. Air purge bulb
4. Decal with start instructions
5. Rear handle
6. Information and warning decal
7. Start/stop switch
8. Fuel tank
9. Starter housing
10. Starter rope handle
11. Chain oil tank
12. Product and serial number plate
13. Throttle trigger lockout
14. Throttle trigger
15. Front handle
16. Muffler
17. Saw chain
18. Bar tip sprocket
19. Guide bar
20. Spiked bumper
21. Chain catcher
22. Chain tensioning screw
23. Clutch cover (CS 2245 II)
24. Right hand guard
25. Clutch cover (CS 2245S II, CS 2250S II)
26. Chain tensioning wheel (CS 2245S II, CS 2250S II)
27. Knob (CS 2245S II, CS 2250S II)
28. Transportation guard
29. Combination wrench
30. Operator's manual
31. Vibration damping system, 3 units
Symbols on the product
Be careful and use the product correctly.
This product can cause serious injury or
death to the operator or others.
Read the operator's manual carefully and
make sure that you understand the
instructions before you use this product.
Always wear approved protective helmet,
approved hearing protection and eye
protection.
This product complies with applicable EC
Directives.
Noise emission to the environment complies
with applicable EC Directives. The noise
emission of the product is specified in
Technical data on page 33 and on the
label.
1049 - 003 - 14.02.2019
Use 2 hands to operate the product.
Do not operate the product with one hand
only.
Do not let the guide bar tip touch an object.
Warning! Kickback can occur when the
guide bar tip touches an object. A kickback
causes a lightning fast reverse reaction that
throws the guide bar up and in the direction
of the operator. Can cause serious injury.
Chain brake, engaged (right). Chain brake,
disengaged (left).
Choke.
Air purge bulb.
Chain oil.
Fuel.
Adjustment of the oil pump.
yyyywwxxxx
Note: Other symbols/decals on the product refer to
certification requirements for some markets.
EU V
WARNING: Tampering with the engine voids
the EU type-approval of this product.
The rating plate shows se-
rial number. yyyy is the
production year and ww is
the production week.
3