Electromagnetic Fields (Emf); Using The Appliance; Battery Low; Shaving Tips - Philips S1070 Manual

- Do not use the supply unit in or
near wall sockets that contain an
electric air freshener to prevent
irreparable damage to the supply
unit.

Electromagnetic fields (EMF)

- This Philips appliance complies
with all applicable standards and
regulations regarding exposure to
electromagnetic fields.
General
- This shaver is waterproof (Fig. 3). It
is suitable for use in the bath or
shower and for cleaning under the
tap. For safety reasons, the shaver
can therefore only be used
without cord.
- The supply unit is suitable for
mains voltages ranging from 100
to 240 volts.
- The supply unit transforms
100-240 volts to a safe low
voltage of less than 24 volts.
Charging
Note: This appliance can only be
used without cord.
When you charge the appliance for
the first time or after a long period of
disuse, let it charge for at least 10
hours.
A fully charged appliance provides up
to 45 minutes of shaving time.
The shaving time may be less as a
result of your shaving behavior, your
cleaning habits or your beard type.
Charging with the supply unit
1 Make sure the shaver is switched
off.
2 Put the small plug in the shaver
and put the supply unit in the wall
socket.
The display of the shaver
indicates that the shaver is
charging.
3 After charging, remove the supply
unit from the wall socket and pull
the small plug out of the
appliance.
Charge indications

Battery low

When the battery is almost empty,
the appliance starts working more
slowly.
Charging
When the appliance is charging, the
charging light lights up white
continuously (Fig. 4).
- The charging light will keep
lighting up white when the
appliance is fully charged.
Note: After charging, remove the
supply unit from the wall socket and
pull the small plug out of the
appliance.

Using the appliance

Note: This appliance can only be
used without cord.
Switching the appliance on
and off
1 To switch the appliance on or off,
press the on/off button once (Fig.
5).

Shaving tips

- Use the shaver with shaving gel or
foam for extra skin comfort, or use
the shaver dry for extra
convenience.
-
We advise you to use the
shaver with shaving gel or
foam when you use it for a wet
shave. Do not use thick
shaving cream or shaving oil
with this shaver.