White Knight DW1260IA Instruction Manual page 27

Hide thumbs Also See for DW1260IA:
Table of Contents

Advertisement

Dishwasher must be level for proper dish rack operation and wash performance.
1
Place level on door and rack track inside the tub as shown to check that the
dishwasher is level.
2
level the dishwasher by adjusting the four leveling legs individually.
3
When level the dishwasher, please pay attention not to let the dishwasher tip over.
Figure 8
Illustration of feet adjustment
NOTE:
The maximum adjustment
height of the feet is 60 mm.
Plea se look at the rating label to know the rating voltage and connect the dishwasher to the appropriate power supply.
Use the required fuse 10 amp , time delay fuse or c ircuit breaker recommended and provide separate circuit serving
only this appliance.
For personal safety:
Do not use an extension cord or an adapter plug with this appliance.
Do not, under any circumstances, cut or remove the earthing connection from
the power cord.
Ensure the voltage and frequency of the power being correspond s to
those on the rating plate. Only in sert the plug into an electrica l socke t which is earthed
prop erly. If the electrical socket to which the appliance must be connected is not
appropriate for the plug , replace the socket, rather than using a a daptors or the like as
they could cause ove rheating an d burns.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents