White Knight DW1260IA Instruction Manual page 22

After Every Wash
After every wash, turn off the water supply to the
appliance and leave the door slightly open so that
moisture and odours are not trapped inside.
Remove the Plug
Before cleaning or performing maintenance, always
remove the plug from the socket.
No Solvents or Abrasive Cleaning
To cle an the e xterior a nd rubber p arts of the dishwasher,
do not use solvents or abrasive cle aning products.
Only use a clo th with warm so apy water.
To remove spots o r stains from the surface of the
interior, use a cloth da mpened with water a n a little
vinegar, o r a cleaning pro duct mad e specifically for
dishwashers.
The installation of the pipes
and electrical equipments
should be done by p rofessionals .
Installation preparation
The installation position of dishwasher sho uld be near the existing in let and drain hoses and
power cord.
One side of the ca binet sink should be chosen to facilitate the connectio n of drain hoses of
the dishwasher.
Note: please check the accompanying installation accessories(hook for aesthetic panel,screw)
When not in Use for a LongTime
It is recommend that you run a was h cy cle with the
dishwasher empty an d the n remove the plug from the
socket, turn off the wa ter supply and leave the door of
the appliance slightly open. This will help the d oor
seals to last longer and prevent odours from forming
within the appliance.
Moving the Appliance
If the appliance must be moved, try to keep it in the
vertical position. If absolutely necessary, it can be
positioned on its back.
Seals
One of the factors that cause odours to form in the
dishwasher is food that remains trapped in the seals.
Periodic cleaning with a damp sponge will prevent this
from occurring.
Electrical Shock Hazard
Disconnect electrical power
before
installing dishwasher.
Failure to do so can result in
death or electrical shock.