TechLogix Networx SSF Single Mode Light Source Manual page 9

1. Do not look into the laser beam when unit is on. Light emitted
is infrared and not visible to the human eye. To avoid the risk
of eye damage, do not look into the laser at any time when the
unit is active.
Turning the Unit On/Off
1. Press and hold for 1 second to turn on the unit. Press and
hold for two seconds to power off the light source.
2. To turn the auto shut-off function on or off, with the light source
turned on press
3. The unit's automatic backlight will be enabled when the light
source is turned on. It will turn off after 1 minute of inactivity.
Press any key to reactivate.
Laser Output
1. Press to choose wavelength.
2. Press to select modulation.
3. The light source will output the desired laser settings.
Battery Replacement
1. If the battery level is low, turn off the unit immediately and
replace the batteries.
2. Remove the batteries if light source is not in use for an extended
period of time.
Handheld Optical Light Source
Operation
Warning
.
9