Functions - TechLogix Networx SSF Single Mode Light Source Manual

Handheld Optical Power Meter
1
2
Power On/Off: Press and hold for 2 seconds to turn
the unit on or off.
Auto Shut-Off Selection: Press this key quickly to
1
turn the auto shut-off function on or off. When auto
shut-off is active the unit will automatically shut off
after ten minutes idle.
REF: Press and hold this key to store current power
value as the reference value.
Quickly press this key to enter the relative
2
measurement mode. This mode compares the
current power with the reference power and shows
the relative power value in dB.
Measurement Setting: Press this key to switch
3
between the absolute measurement (dBm) and
relative measurement (nW) of the optical power.
Wavelength Selection: Press this key to select one of
4
the 6 calibrated wavelengths

Functions

15
4
3